1. Home
  2. Residential
  3. Manage your water usage
  4. Community water fill stations

Potable drinking water

Residents who are not connected to our network and rely on tank water may need to access drinking water when their tank supply runs low.

We have four water fill stations for community members to access potable drinking water at any time.

They are located at:

  • 17 Mary River Road, Cooroy
  • Zealey Road, Nambour (next to number 49)
  • Samsonvale Road, Warner (opposite number 350)
  • Showgrounds Drive, Highvale (opposite number 38)

What do I need?

    You will need to bring your own:

    • Container to fill
    • Hose
    • Hose fitting – the filling stations have:
      • a 50mm camlock outlet controlled by a valve at exit (see image below). You will need a 50mm female camlock coupler.
      • a 25mm tap outlet with valve at exit (see image below). You will need a 25mm female hose coupler.

    If you use a garden hose, you will need a tap adaptor to fit to the fill station correctly.

    Community Water Fill Stations - Filling

         

    50mm camlock connection

    Community water fill stations 50mm camlock connection

    25mm connection

    Community water fill stations 25mm connection

    25mm connection

    Community water fill stations 25mm connection

    Payment information

    How much does the water cost?

    Water is charged at $4.84 per 1000 litres, which is consistent with connected residential customers.

    How do I pay for it?

    You can use a credit or debit card to obtain water from the filling station via PayWave. You can spend a minimum of $1 and a maximum of $99 per transaction.

    Please note: if you use less than $1 worth of water (i.e. 233 litres) you will still be charged the minimum amount of $1.

    • The dollar amount you select on the filling station will be pre-authorised and reserved against your credit limit by your bank.
    • Water will be dispensed up to the pre-selected amount (e.g. $50) or until you press the finish button or turn off the tap.
    • Charges will apply to your card for the actual amount of water you dispense.
    • If you take less than the pre-selected amount, the difference will still be reserved against your credit limit. It may take up to 7 business days for your bank to release the reserved amount.

    If your card payment does not work, do not keep trying to use PayWave. Please check:

    • Do you have enough funds on your card?
    • Have you followed the instructions on the machine? Please note you need to select the ENTER button twice – The first time to confirm the value of water you wish to take then again after you present your card and proceed to open the valve/tap.

    Every time you use PayWave, your bank tries to authorise the pre-selected amount against your credit limit reducing your available credit. 

    Your bank will hold your funds for up to 7 business days. Once your bank has determined that you did not take the water, they will release the funds back into your account.

    FAQs

    If you notice something wrong with the fill station, please contact us to report the problem and provide the following details:

    • the location of the water fill station where the problem occurred
    • a description of the problem
    • date and time of the issue
    • your contact number or email (in case we need further information).

    We will investigate and repair if necessary or contact you if further information is needed.

    Receipts are not issued at the water filling stations. You can use your bank statements for tax purposes.

    If you need a receipt, please call us on 1300 086 489 or email us at customer.service@unitywater.com and provide the following information:

    • date, time and location you bought water
    • amount you spent
    • last 4 digits of the credit card or debit card you used
    • name and address you would like to have on the receipt.

    We will then email or post a receipt to you.

    A pre-authorisation is a process the bank undertakes to make sure you have sufficient funds available to cover the transaction you want to process. The amount of the pre-authorisation is held by your bank as a pending charge which is deducted from your available credit.

    When you have completed your transaction the actual value of the water taken is deducted from your pre-authorisation and is then passed on to Unitywater.

    The balance of your pre-authorisation is NOT PAID TO UNITYWATER but held by your bank. Your bank will return the balance to your available credit after the transaction is finalised. The timeframe for this will depend on your bank and can be up to 7 days. Please note that there is a minimum charge of $1, this means that any transactions under $1 will not be refunded.

    For example: you select $50 and swipe your card for pre-authorisation, the $50 is held as a pending transaction against the card and is deducted from the available credit. You then only dispense $40 worth of water. The $10 balance is not passed onto Unitywater but held by the bank and released to you after the transaction is completed – this may take the bank up to 7 days.

    If you have questions or concerns about the balance of your pre-authorisation please contact your bank directly.

    Every time you PayWave, your bank tries to authorise the pre-selected amount against your credit limit. If you have scanned your card multiple times don’t worry, you will only be charged for the value of the water you have taken. The amounts that have been pre-authorised will initially be held against your credit balance by your bank as pending transactions.  Once your bank has determined that you did not take the water, they will release the funds back into your account. The timeframe for this will depend on your bank and can be up to 7 days.

    If you have questions or concerns about the balance of your pre-authorisation please contact your bank directly.

    This may be because you have not pressed ENTER the second time. After your card has been pre-authorised you need to press ENTER a second time before the water will dispense from the unit. Refer to the step-by-step instructions on the front of the fill station.

    If you are still unable to access water please contact Unitywater on 1300 086 489 and we will investigate further.

    Don’t worry. Once the water stops flowing from the machine they are set to time out after 60 seconds. This means that even if you forget to press the finish (Cancel) button your transaction automatically finalises for you.

    The intention is that the Community Fill Stations are for domestic residential use only. Commercial water carriers should continue to use the commercial fill stations we have available. The Community Fill Stations are not appropriate for commercial customers due to low flow rates and a maximum purchase of $99 by credit or debit card. Additionally, these fill stations are not linked to Unitywater commercial accounts, do not have access fobs, and do not issue receipts.






    Back to top